Support Material
From MatterControl Manual
< SETTINGS | General | Speed | Speed for Other Printing
Revision as of 12:37, 1 December 2016 by MatterHackers (Talk | contribs) (MatterHackers moved page Settings/General/Speed/Speed for Other Printing/Support Material to SETTINGS/General/Speed/Speed for Other Printing/Support Material)
Function
The speed at which support material structures will print.
Parameters
- millimeters per second (mm/s)
Custom G-Code Variable
support_material_speed
Example(s)
mm/s
In this example, the support material will print at 35 mm/s.
