Port

From MatterControl Manual
< SETTINGS‎ | Printer‎ | Connection‎ | Details
Revision as of 12:45, 1 August 2017 by MatterHackers (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
A screenshot of the Port setting as seen in MatterControl's SETTINGS pane.

Function

The TCP port to be used to connect to the printer over the network.

This setting only appears if you have Networked Printing enabled.

Parameters

  • Port Number

Example(s)

In this example, port 23 at address 192.168.1.69 will be used.

Port-ss-ex.png
Retrieved from "http://wiki.mattercontrol.com/index.php?title=SETTINGS/Printer/Connection/Details/Port&oldid=4032"