Slice Settings
From MatterControl Manual
Revision as of 16:22, 18 December 2015 by MatterHackers (Talk | contribs)
This line is the screenshot of the settings pane with the active setting highlighted or circled.
Function
Number 1 is the function as described in the help text, and/or Taylor's slicer settings article text {{{1}}}
Parameters
The format of input accepted. For example, layer height takes count or mm. {{{2}}}
Example(s)
An example of each of the parameters, including a screenshot. The first will be included in this template, and any subsequent parameters will need to be inserted on the actual page. See Perimeters for an example of this in practice. {{{3}}}