Support Material
< SETTINGS | Filament | Extrusion | Extrusion WidthRevision as of 12:04, 31 December 2015 by MatterHackers (Talk | contribs)
Revision as of 12:04, 31 December 2015 by MatterHackers (Talk | contribs)
Function
A modifier of the width of the extrusion when printing support material.
Parameters
- millimeters (mm)
- percent (%)
Set to 0 to use default extrusion width.
Example(s)
mm
In this example, the adjusted nozzle diameter for the support material extrusion will be 0.3 mm.
%
In this example, the nozzle size set under Printer settings will be modified by 115%. For this example, the nozzle size was 0.4 mm, so the adjusted size will be 0.46 mm.
