Bed Remove Part Temperature
< SETTINGS | Filament | Temperatures | Bed TemperaturesRevision as of 12:01, 13 January 2016 by MatterHackers (Talk | contribs)
Revision as of 12:01, 13 January 2016 by MatterHackers (Talk | contribs)
Function
The temperature to which the bed will heat (or cool) in order to remove the part, as specified in Custom G-Code.
Used only by Custom G-Code fields as a Custom G-Code variable.
Parameters
- degrees Celsius
Custom G-Code Variable
bed_remove_part_temperature
Example(s)
degrees
In this example, the bed will cool to 55 degrees after the print as specified in the End GCode field, assuming the variable is used.
