Open main menu

Has Hardware Leveling

< SETTINGS‎ | Printer‎ | Features‎ | Hardware
Revision as of 13:22, 20 January 2016 by MatterHackers (Talk | contribs) (Text replacement - "[[Slice Settings/" to "[[Settings/")

Revision as of 13:22, 20 January 2016 by MatterHackers (Talk | contribs) (Text replacement - "[[Slice Settings/" to "[[Settings/")

A screenshot of the Has Hardware Leveling setting as seen in MatterControl's SETTINGS pane.

Function

The printer has its own auto bed leveling probe and procedure which can be called using a G29 command during Start G-Code.

Disabling this function will show the MatterControl Software Print Leveling option and allow its use.

Parameters

  • Boolean

Example(s)

Boolean

The check box is checked to use the function.

Has Hardware Leveling-ss-ex.png

The check box is unchecked to leave the function unused.

Has Hardware Leveling-ss-ex1.png

Last modified on 1 December 2016, at 12:37