Edit

Edit mode allows the user to make minor changes to the model currently loaded in 3D View.

Edit mode View Controls function much the same way as in the rest of 3D View, with the exception of the addition of the Select Part tool.

Select Part

The Select Part tool allows the user to perform two functions:

• select a part by clicking on it
• move a part around on the X and Y axes on the bed by clicking and holding while moving the mouse.

Once selected, the part will display slightly brighter and a 3D black arrow icon ( will appear above.

The ROTATE function allows the user to specify the number of degrees to rotate the selected model, as well as the axis around which the rotation will occur.

Degrees

Enter the number of degrees to rotate the model.

Axes buttons

Click the button for the axis around which to rotate the model to perform the rotation.

Align to Bed

Will cause MatterControl to attempt to bring the part down flat, adjacent to the bed. Useful for resetting the position of the model.

The SCALE section allows the user to change the size of the model.

Ratio

The Ratio field allows the user to specify a positive whole or decimal number which will be multiplied by the existing model's dimensions.

Presets

The Ratio field has several presets for common translations:

• mm to in (.0393)
• in to mm (25.4)
• mm to cm (.1)
• cm to mm (10)
• reset (1)

X

The X field allows for direct specification of the dimension of the model's size along the X axis.

Y

The Y field allows for direct specification of the dimension of the model's size along the Y axis.

Z

The Z field allows for direct specification of the dimension of the model's size along the Z axis.

Lock Ratio

If checked, the Lock Ratio option maintains the ratio of the model's dimensions relative to each other. For example, if a model's dimensions are X:20, Y:20, Z:50 and the Y value is changed to 10, X becomes 10 and Z becomes 25 automatically.

The MIRROR section allows the user to translate a model over an axis.

X

Click the X button to translate the model over the X axis.

Y

Click the 'Y button to translate the model over the Y axis.

Z

Click the Z button to translate the model over the Z axis.

The MATERIALS section allows the user to specify which extruder will be used to print a model.

This section is shown only when the Extruder Count setting is set to a value greater than 1.

See also: Multi-Extrusion

The DISPLAY section allows the user to toggle certain visual options.

Show Print Bed

If enabled, the graphical print bed is displayed.

Show Print Area

If enabled, a translucent box appears to indicate the build volume. The box's height is set by the Build Height setting.

Shaded

Shows only the faces of the model.

Outlines

Shows the faces and lines of a model, but does not include lines which connect vertices of single flat polygons.

Polygons

Shows all faces and lines of a model, including all lines which connect vertices of single flat polygons.

Opens the operating system file manager so a model file can be selected for addition to any existing models in the current view.

Separates unconnected models. This is typically used if multiple models are loaded into MatterControl as part of one STL file.

Once ungrouped, the models can be selected and edited individually.

Combines all models currently displayed. The combined "model" can then be selected and edited as a whole.

Moves ungrouped models into a grid pattern relative to the currently selected model, then group all models.

Centers all models in a grid pattern.

Makes a copy of the currently selected model.

Deletes the currently selected model.

Exits Edit mode. The user is prompted to save any unsaved changes.

Saves changes to the model.

Prompts the user to save changes to a different file in a specified location.