Slice Settings1
Revision as of 12:41, 8 March 2016 by MatterHackers (Talk | contribs)
Revision as of 12:41, 8 March 2016 by MatterHackers (Talk | contribs)
This is a duplicate template for use with duplicate slice settings (i.e. General -> Speed -> Support Material and Filament -> Extrusion -> Support Material). The associated file names have a 1 at the end of the base; that is the only difference. This and Template:Slice Settings should be edited at the same time.
File:Slice Settings11-ss.png A screenshot of the Slice Settings1 setting as seen in MatterControl's Settings pane.
Function
Number 1 is the function as described in the help text, and/or Taylor's slicer settings article text {{{1}}}
Parameters
The format of input accepted. For example, layer height takes count or mm. {{{2}}}
Example(s)
An example of each of the parameters, including a screenshot. The first will be included in this template, and any subsequent parameters will need to be inserted on the actual page. See Settings/General/Layers-Surface/Outer Surface - Perimeters/Perimeters for an example of this in practice. {{{3}}}
