Bed Temperature

< SETTINGS‎ | Filament‎ | Temperatures‎ | Bed Temperatures

Revision as of 17:38, 6 December 2016 by MatterHackers (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Revision as of 17:38, 6 December 2016 by MatterHackers (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

A screenshot of the Bed Temperature setting as seen in MatterControl's SETTINGS pane.

Function

The temperature to which the bed will be set for the duration of the print. Set to 0 to disable.

Restrictions

Not shown if Has Heated Bed is disabled.

Parameters

degrees Celsius

Custom G-Code Variable

bed_temperature

Example(s)

degrees

In this example, the bed will be set to 50 degrees Celsius for the print.

Bed Temperature-ss-ex.png

Last modified on 7 January 2019, at 18:31