Open main menu

Bed Temperature

< SETTINGS‎ | Filament‎ | Temperatures‎ | Bed Temperatures
Revision as of 18:31, 7 January 2019 by Tanderson (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Revision as of 18:31, 7 January 2019 by Tanderson (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Merge

Migrating: For MatterControl 2.0 the MatterControl documentation is moving to matterhackers.com/mattercontrol/support/.
This page is in the process of being migrated. It's new home will be matterhackers.com/mattercontrol/support/slice-settings/filament/filament#bed-temperature.

A screenshot of the Bed Temperature setting as seen in MatterControl's SETTINGS pane.

Function

The temperature to which the bed will be set for the duration of the print. Set to 0 to disable.

Restrictions

Parameters

  • degrees Celsius

Custom G-Code Variable

bed_temperature

Example(s)

degrees

In this example, the bed will be set to 50 degrees Celsius for the print.

Bed Temperature-ss-ex.png
Last modified on 7 January 2019, at 18:31