Open main menu

Changes

SETTINGS/Filament/Extrusion/Extrusion Width/Outside Perimeters

No change in size, 19:54, 31 December 2015
no edit summary
=== % ===
In this example, the [[Slice Settings/Printer/Extruder/Extruder X/Nozzle Diameter|nozzle size set under Printer settings]] will be modified by 90%. For this example, the nozzle size was 0.4 5 mm, so the adjusted size will be 0.44 45 mm.
[[File:{{SUBPAGENAME}}-ss-ex1.png]]