After Tool Change G-Code
From MatterControl Manual
< SETTINGS | Printer | Custom G-Code
Revision as of 13:41, 13 January 2016 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |G-Code to be run after every tool change (T0, T1, T2, etc.).|*G-Code Will accept Custom G-Code variables.| === G-Code === In...")
Function
G-Code to be run after every tool change (T0, T1, T2, etc.).
Parameters
- G-Code
Will accept Custom G-Code variables.
Example(s)
G-Code
In this example, the printer will run a series of G-Code commands to wipe the nozzle after every T0, T1, T2, etc. during the print.
