Speed
From MatterControl Manual
< SETTINGS | Filament | Retraction | While Printing
Revision as of 12:54, 20 January 2016 by MatterHackers (Talk | contribs) (MatterHackers moved page Slice Settings/Filament/Filament/Retraction/Speed to Settings/Filament/Filament/Retraction/Speed)
Function
The speed at which filament will retract and re-extrude until the next print move.
Parameters
- millimeters per second (mm/s)
Custom G-Code Variable
retract_speed
Example(s)
mm/s
In this example, filament will retract and re-extrude at 110 mm/s until the next print move.
