Infill
From MatterControl Manual
< SETTINGS | General | Speed | Speed for Infill
Revision as of 12:55, 20 January 2016 by MatterHackers (Talk | contribs) (MatterHackers moved page Slice Settings/General/Speed/Speed for Infill/Infill to Settings/General/Speed/Speed for Infill/Infill without leaving a redirect)
Function
The speed at which infill will print.
Parameters
- millimeters per second (mm/s)
Custom G-Code Variable
infill_speed
Example(s)
mm/s
In the case shown below, the infill will print at 40 mm/s.
