2,552
edits
Changes
m
MatterHackers moved page Settings/Filament/Extrusion/Extrusion Width/Support Material to SETTINGS/Filament/Extrusion/Extrusion Width/Support Material
{{Slice Settings
|A modifier of the [[Slice Settings/Printer/Extruder/Extruder X/Nozzle Diameter|width of the extrusion]] when printing support material.|*millimeters (mm)
*percent (%)
Set to 0 to use [[Slice Settings/Printer/Extruder/Extruder X/Nozzle Diameter|default extrusion width]].|
=== mm ===
In this example, the adjusted nozzle diameter for the support material extrusion will be 0.3 mm.}}
=== % ===
In this example, the [[Slice Settings/Printer/Extruder/Extruder X/Nozzle Diameter|nozzle size set under Printer settings]] will be modified by 115%. For this example, the nozzle size was 0.4 mm, so the adjusted size will be 0.46 mm.
[[File:{{SUBPAGENAME}}-ss-ex1.png]]
