Length on Move
< SETTINGS | Filament | Retraction | While PrintingRevision as of 14:01, 21 November 2016 by MatterHackers (Talk | contribs)
Revision as of 14:01, 21 November 2016 by MatterHackers (Talk | contribs)
Function
The distance filament will reverse before each qualifying non-print move.
Parameters
- millimeters (mm)
Can be zero.
Custom G-Code Variable
retract_length
Example(s)
mm
In this example, filament will reverse 2.5 mm before travelling 5 mm or more.
