Difference between revisions of "SETTINGS/Filament/Temperatures/Bed Temperatures/Bed Remove Part Temperature"
From MatterControl Manual
< SETTINGS | Filament | Temperatures | Bed Temperatures
| Line 3: | Line 3: | ||
|The temperature to which the bed will heat (or cool) in order to remove the part, as specified in Custom G-Code. | |The temperature to which the bed will heat (or cool) in order to remove the part, as specified in Custom G-Code. | ||
| − | Used only by Custom G-Code fields as a [[Custom | + | Used only by Custom G-Code fields as a [[Custom G-Code Variables|Custom G-Code variable]].|*degrees Celsius |
== [[Custom G-Code Variables|Custom G-Code Variable]] == | == [[Custom G-Code Variables|Custom G-Code Variable]] == | ||
Revision as of 13:01, 13 January 2016
Function
The temperature to which the bed will heat (or cool) in order to remove the part, as specified in Custom G-Code.
Used only by Custom G-Code fields as a Custom G-Code variable.
Parameters
- degrees Celsius
Custom G-Code Variable
bed_remove_part_temperature
Example(s)
degrees
In this example, the bed will cool to 55 degrees after the print as specified in the End GCode field, assuming the variable is used.
