Changes

Created page with "{{Slice Settings |The length and width of a tower created at the back left of the print used for wiping the next nozzle when changing between multiple extruders. Set to 0 to..."
{{Slice Settings

|The length and width of a tower created at the back left of the print used for wiping the next nozzle when changing between multiple extruders. Set to 0 to disable.|*millimeters (mm)|

=== mm ===

For this example, [http://104.154.32.252/images/0/0d/Calibration_-_Box.stl Calibration - Box.stl] is the model used.

A 2 mm x 2 mm wipe tower shown at the back left of the two Calibration Boxes.}}