Bridges
From MatterControl Manual
< SETTINGS | General | Speed | Speed for Other Printing
Revision as of 13:37, 1 December 2016 by MatterHackers (Talk | contribs) (MatterHackers moved page Settings/General/Speed/Speed for Other Printing/Bridges to SETTINGS/General/Speed/Speed for Other Printing/Bridges)
Function
The speed at which bridging between walls will print.
Parameters
- millimeters per second (mm/s)
Custom G-Code Variable
bridge_speed
Example(s)
mm/s
In this example, the bridge will print at 60 mm/s.
