Changes

SETTINGS/General/Support Material/Support Options/Air Gap

No change in size, 19:58, 8 March 2016
no edit summary
{{Slice SettingsSettings1
|The distance to skip between the support (including [[Settings/General/Support Material/Support Options/Interface Layers|interface layers]]) and the model. For PLA and ABS a value between 0.1 and 0.3 generally works well.
In MatterControl 1.5, [[{{oldid|Settings/General/Support_Material/Support_Options/Air_Gap&oldid=|1895|Z Gap]] }} was changed to Air Gap. Z Gap only worked in increments of the layer height. Air Gap can be any distance.|*millimeters (mm)
Can be zero.|