Layer Change G-Code

From MatterControl Manual
< SETTINGS‎ | Printer‎ | Custom G-Code
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
A screenshot of the Layer Change G-Code setting as seen in MatterControl's SETTINGS pane.

Function

G-Code to be run at the beginning of every layer.

NOTE: All Custom G-Code is subject to filtering rules.

Parameters

All G-Code must be uppercase to function properly.

Example(s)

G-Code

In this example, the printer will insert a comment indicating the number of the layer at the beginning of every layer of the print.

Layer Change G-Code-ss-ex.png