Difference between revisions of "SETTINGS/Printer/Features/Hardware/Has Hardware Leveling"

Revision as of 14:22, 20 January 2016

A screenshot of the Has Hardware Leveling setting as seen in MatterControl's SETTINGS pane.

The printer has its own auto bed leveling probe and procedure which can be called using a G29 command during Start G-Code.

Disabling this function will show the MatterControl Software Print Leveling option and allow its use.

The check box is checked to use the function.

The check box is unchecked to leave the function unused.

@@ Line 1: / Line 1: @@
 {{Slice Settings
-|The printer has its own [[Automatic Print Leveling|auto bed leveling probe and procedure]] which can be called using a G29 command during [[Slice Settings/Printer/Custom G-Code/Start G-Code|Start G-Code]].
+|The printer has its own [[Automatic Print Leveling|auto bed leveling probe and procedure]] which can be called using a G29 command during [[Settings/Printer/Custom G-Code/Start G-Code|Start G-Code]].
 Disabling this function will show the MatterControl [[Options/Software Print Leveling|Software Print Leveling]] option and allow its use.|*Boolean|