Has Hardware Leveling
From MatterControl Manual
< SETTINGS | Printer | Features | Hardware
Revision as of 14:22, 20 January 2016 by MatterHackers (Talk | contribs) (Text replacement - "[[Slice Settings/" to "[[Settings/")
Function
The printer has its own auto bed leveling probe and procedure which can be called using a G29 command during Start G-Code.
Disabling this function will show the MatterControl Software Print Leveling option and allow its use.
Parameters
- Boolean
Example(s)
Boolean
The check box is checked to use the function.
The check box is unchecked to leave the function unused.
