Has Hardware Leveling

From MatterControl Manual
< SETTINGS‎ | Printer‎ | Features‎ | Hardware
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
A screenshot of the Has Hardware Leveling setting as seen in MatterControl's SETTINGS pane.

Function

The printer has its own auto bed leveling probe and procedure which can be called using a G29 command during Start G-Code.

Disabling this function will show the MatterControl Software Print Leveling option and allow its use.

Parameters

  • Boolean

Example(s)

Boolean

The check box is checked to use the function.

Has Hardware Leveling-ss-ex.png

The check box is unchecked to leave the function unused.

Has Hardware Leveling-ss-ex1.png