Difference between revisions of "SETTINGS/Printer/Print Area/Size and Coordinates/Z Offset"
From MatterControl Manual
< SETTINGS | Printer | Print Area | Size and Coordinates
m (MatterHackers moved page Slice Settings/Printer/Print Area/Size and Coordinates/Z Offset to Settings/Printer/Print Area/Size and Coordinates/Z Offset without leaving a redirect) |
m (MatterHackers moved page Settings/Printer/Print Area/Size and Coordinates/Z Offset to SETTINGS/Printer/Print Area/Size and Coordinates/Z Offset) |
(No difference)
| |
Latest revision as of 13:37, 1 December 2016
Function
The distance to move the nozzle along the Z axis to ensure that it is the correct distance from the print bed. A positive number will raise the nozzle, and a negative number will lower it.
Parameters
- millimeters (mm)
Can be zero.
Can be negative.
Custom G-Code Variable
z_offset
Example(s)
mm
In this example, all values for the Z position will be offset by 0.2 mm so the nozzle will be 0.2 mm higher than it would normally have been.
