Changes

Jump to: navigation, search

Frequently Asked Questions

366 bytes added, 00:25, 30 December 2015
Is MatterControl compatible with my printer?
This mainly depends on the language your printer speaks. Currently, MatterControl supports two languages for communicating with the printer; [http://reprap.org/wiki/G-code GCode] and [http://www.sailfishfirmware.com/doc/details-s3g-and-x3g.html S3G/X3G]. GCode is the standard language used by RepRaps and most other printers. S3G is a condensed language used by Makerbot and Flashforge. Most consumer 3D printers speak GCode.
In addition, you will need appropriate slice settings for your printer. MatterControl has built in profiles for many printers. Here is A link to the [http://www.mattercontrol.com/#jumpSupportedModels complete list]can be found below. If your printer is not on the list, don't worry. You will just need to fill in the settings yourself. Obtain specifications from the manufacturer and input them into MatterControl under `Settings & Controls -> Settings -> Printer` as well as a few under `Settings & Controls -> Settings -> Filament`. Some newer GCode printers are using intermediary boards to run web servers in order to control the prints. These printers, while they do speak GCode, are not able to be controlled directly by MatterControl. GCode generated in MatterControl can still be sent to the printer using its web-based interface.  LINK: [http://www.mattercontrol.com/#jumpSupportedModels Known compatible printers list].
== Why are my objects the wrong scale? ==

Navigation menu